IVT-220-16-16A Inverter And AC Two Way Input Control And Switch Station

•  Carspa IVT switching station allows trouble-free operation of an inverter and 230 V AC mains in the same circuit.

•  It offers the possibility to choose the preferred source of two different power sources (priority circuit).

•   The switching station may only be connected to 230 V AC/50 Hz.

•   Operate only inverters with safe electrical separation (galvanic separation) between input circuit (battery voltage) and output circuit (230 V).

•   Before installation ensure that the inverter output as well as 230 V AC mains supply are voltage free and equipped with a safety lock system to prevent unintentional start of the device.

•   Ensure that the connection cables are connected properly and have good contact, as loose contacts may cause smoldering fire.

•   Do not connect the neutral conductor on the consumer side to earth or protective earth conductor; as the consumer sockets in particular have no protective multiple earthing (i.e. connection of PE­grounding wire with the neutral connector).

• The cross sections of the used cables must be selected and secured in compliance with applicable law.

• It is not permissible to use the device for three-phase current.